Edited by YoungGun001, 20 July 2009 - 02:14 AM.
G Body Trunk Space
#1
Posted 20 July 2009 - 02:08 AM
#2
Posted 20 July 2009 - 01:05 PM
YoungGun001, on Jul 20 2009, 07:08 AM, said:
Edited by SKEEMASK, 21 July 2009 - 11:47 AM.
#3
Posted 20 July 2009 - 02:31 PM
so ya like dude said 10's n 12's your best bet and im sure these audio experts will tell you a different box or way to do it and thats koo im juz sayin how i had mine..im not into a whole lot of trunk rattle i like the pressure in the cabin
#4
Posted 20 July 2009 - 06:27 PM
#5
Posted 20 July 2009 - 06:36 PM
crownvic02, on Jul 20 2009, 07:27 PM, said:
#6
Posted 20 July 2009 - 06:43 PM
941cutty, on Jul 20 2009, 05:36 PM, said:
Edited by crownvic02, 20 July 2009 - 06:47 PM.
#7
Posted 20 July 2009 - 06:51 PM
crownvic02, on Jul 20 2009, 07:43 PM, said:
Edited by 941cutty, 20 July 2009 - 11:02 PM.
#8
Posted 20 July 2009 - 11:06 PM
941cutty, on Jul 20 2009, 05:51 PM, said:
#9
Posted 20 July 2009 - 11:15 PM
crownvic02, on Jul 21 2009, 12:06 AM, said:
#10
Posted 20 July 2009 - 11:17 PM
#11
Posted 20 July 2009 - 11:55 PM
#12
Posted 21 July 2009 - 11:50 AM
Edited by SKEEMASK, 21 July 2009 - 12:13 PM.
#13
Posted 21 July 2009 - 12:16 PM
Does anybody have pics to show from their projects or designs?
I measured the extra space in the top/back and it's 12'tall x 42'wide x 8'deep
Edited by YoungGun001, 07 August 2009 - 01:10 PM.
#14
Posted 28 July 2009 - 04:18 PM
no more than 4 10's ported or 2 12''s ported.
id you wanna go sealed then you can add more subs and 15's facing up.
its your choice.
#15
Posted 28 December 2009 - 06:19 PM
Edited by SRX FLOATIN' BITCH, 04 July 2010 - 11:55 PM.
#16
Posted 04 July 2010 - 11:56 PM
#17
Posted 05 July 2010 - 12:18 AM

"Ain't nuthing like swerving in front of a nigga then stop... back rims spinning forward while the front spin backwards and the trunk whamming..... #i'm sorry but a forgi can't do that
"
#18
Posted 05 July 2010 - 12:34 AM
Amps
Batteries
some kinda rack/area to keep the t-tops when they aint on (dont like them in the back seat)
Lets see If I can make it happen.
/Were did you hear that?
/The Internet!!
#19
Posted 05 July 2010 - 09:17 AM
This the only way you getting you can get them in there with cabin gain

Something like that, ported rear seat with grill mes to cover the port or whatver.
People have put (4) 10"s ported in gbodys I would believe, I just seen (2) 15"s ported in a gbody for the first time, small and made nothing but trunk noise, Inside sucked, sound like 6x9's
The box I was trying to do in the cutty was a 8 cube box total (6 cubes internal) and left me with about an inch or 2 for air to pass on top of the box...not happening.
Edited by Audio Advice, 05 July 2010 - 09:23 AM.
#20
Posted 05 July 2010 - 11:43 AM
Edited by crownvic02, 05 July 2010 - 11:44 AM.

"Ain't nuthing like swerving in front of a nigga then stop... back rims spinning forward while the front spin backwards and the trunk whamming..... #i'm sorry but a forgi can't do that
"
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
















